ML4001L-AWG Arbitrary Waveform Generator
- Series: High Speed Source - Brand: Te-lead
With 400ZR adoption around the corner, an affordable tool set that can support the development of this technology and prepare for mass adoption is essential. The ML4100L-AWG is a new instrument that allows development and validation of equipment for high-performance high-speed data center networking.
The ML4100L-AWG is a fully feature arbitrary waveform generator that can be configured as four channels of 64 GBd each. In this mode, programmable RJ/SJ jitter injection, ISI and Cross-Talk emulation are supported.
The AWG is also a PPG that generates various PRBS patterns to double as a BERT TX for either NRZ or PAM4. In this mode, the PPG offers an FFE pre-emphasis filter with 7 taps (1 tap/UI).
• 4-Channel Differential Arbitrary Waveform Generators with selectable Baud Rate in the range of 0.5-64 GBd, 8-bit DAC, and User Defined Modulation
• 2 Dual-Channel (I/Q) Differential Pulse Pattern Generators with selectable Baud Rate in the range of 25-64 GBd, NRZ/PAM-4 Modulation, and Independent 7-tap FFE on each transmitter
• Ability to generate coherent signals for QAM modulation (horizontal and vertical I/Q pairs)
• The wide range of Baud rate coverage allows PHY testing of Ethernet, PCIe 5/6, USB and others
• Independent control of inner eye levels
• Ability to generate compliance test patterns with injected RJ/SJ jitter and emulation of ISI and Cross-Talk for PHY testing of MIPI A/C/D/M-PHY, PCIe, USB and others
• Ability to tune the Baud rate in very fine steps to facilitate finding locking margin
• Library of pre-defined waveforms
