CISC UHF RFID Tag performance tester
- Series: UHF RFID Tester - Brand: Te-lead
CISC RAIN Xplorer has become the best choice in the retail deployment based on the ability to measure the performance of multiple tags in the field. Xplorer inventories all tags in the field and lets the user evaluate the performance of each single one within the population. No matter if tags are isolated or closely stacked, Xplorer delivers performance results within the target application setup. Xplorer is ready to perform measurement tests based on “tagged-item test procedure” as defined by The Tagged Item Performance Protocol (TIPP) Guidelines.
KEY BENEFITS
Delivers key characteristic of a tag
Analysis multiple tags in the field
Several tag access test
Selection of best spot to place the tag on a product
Performance measurement tests based on TIPP Guidelines
KEY FEATURES
Performance Sweep
Tag Radiation Pattern
TID Inventory Function for
Multiple protocols (ISO/IEC 18000-63 (Type C), GS1 EPC Gen 2, GB/T 29768, Brazilian SINIAV, ARTESP, Brazil-ID.
ISO/IEC 29167 crypto suite support
ISO/IEC 18046-3 Tag performance tests
ETSI EN 302 208 reader and tag tests (RED compliance/CE marking)
CISC RFID Xplorer delivers key performance metrics of UHF RFID tags, such as Read and Write range over frequency (meters, feet), Backscatter range over frequency (meters, feet), Minimum tag activation electric field over frequency (V/m),
Minimum tag activation power over frequency (dBm), Tag backscatter power over frequency (dBm), Differential radar cross-section over frequency (dBsqm) and the angular sensitivity – tag radiation pattern.
Xplorer´s software Interference Analyzer offers the possibility of analyzing interferences in the frequency range from 800 MHz to 1 GHz. It can be used by users to perform a quick measurement before testing the tag and the reader to understand the RF interference present in the frequency range in which the tests are being conducted.
This tool also helps in quantifying the ambient noise/interference level when the CISC RFID Xplorer is used to test the performance of RFID readers or tags outside a controlled RF test environment (outside RF test chamber).The interference analyzer also reveals the presence of other readers which helps system integrators troubleshooting application test setups.
| 1.1 | CISC-XPL-HW-000001-V04 | CISC RFID Xplorer 200 |
| 1.2 | CISC-XPL-HW-000002-V02 | RHCP Patch Antenna, 800 - 1000 MHz, 5 dBi |
| 1.3 | CISC-XPL-HW-000003-V02 | LHCP Patch Antenna, 800 - 1000 MHz, 5 dBi |
| 1.4 | CISC-XPL-HW-000004-V01 | Adapter for mounting of one patch antenna |
| 1.5 | CISC-XPL-HW-000005-V01 | RF cable (3m SMA-N, blue, high shielding) |
| 1.6 | CISC-XPL-HW-000006-V01 | Transportation case for RFID Xplorer |
| 1.7 | CISC-XPL-HW-000009-V01 | Reference tag including calibration data; Frequency band 800 MHz to 1GHz; resolution 5 MHz |
| 1.8 | CISC-XPL-HW-000016-V01 | Licensing USB-stick (CodeMeter CmStick/T) |
| 1.9 | CISC-STD-HW-000002-V03 | Laptop with Gbit Ethernet LAN + WLAN + Core i7 + SSD |
| 1.10 | CISC-XPL-HW-000020-V01 | Shipment packaging for transport case Xplorer |
| CISC RFID Xplorer - Tag performance tester add-ons | ||
| 2.1 | CISC-XPL-SW-000001-V02 | CISC RFID Xplorer UHF ISO/IEC 18000-63 (Type C) / Gen 2 Software for automated tag performance test measurements |
| 2.2 | CISC-XPL-SW-000004-V01 | CISC RFID Xplorer software extension for tag - TID inventory, user commands, read and write memory tests |
| 2.3 | CISC-XPL-SW-000002-V01 | CISC RFID Xplorer UHF ISO/IEC 18000-63 (Type C) / Gen 2 angular tag sensitivity performance measurement software |
| 2.4 | CISC-XPL-HW-000008-V01 | Antenna mast and DUT support for bistatic setup |
| 2.5 | CISC-XPL-HW-000055-V01 | CISC Turntable |
